oxygen bath

英 [ˈɒksɪdʒən bɑːθ] 美 [ˈɑːksɪdʒən bæθ]

网络  氧气浴

医学



双语例句

  1. I had been expecting it to be greener because indigo is not supposed to turn blue until it comes in contact with oxygen, however, perhaps oxygen was already diffusing into the liquid of the dye bath.
    我本来觉得它应该要更绿一点,因为靛蓝在接触氧之前是不会变蓝色的。也许在“染色浴”中的液体已经混进来一些氧了。
  2. This paper describes the technical features of oxygen bottom-blown bath smelting of copper, the effect in refractory gold concentrates treating, and the application in Vietnam, Dongying, Muping.
    介绍了底吹熔池炼铜技术的特点、处理复杂金精矿的效果以及在越南、东营、牟平的应用情况。
  3. The First Smelter Introducing Oxygen enriched Air Bath Smelting Technology in China& A brief account of technical modification in Daye Smelter; Determination Method Improvement of Selenium Content in Copper Electrolysis Slime from Smelter of Daye Nonferrous Metals Corporation
    我国第一座引进富氧熔池熔炼技术的工厂&大冶冶炼厂冶炼技术改造概况大冶有色金属有限公司冶炼厂铜阳极泥中硒测定方法改进
  4. Penetration length of a side-blown oxygen jet by immerged lance in molten steel bath
    潜入侧吹氧气流股在炼钢熔池中的穿透长度的研究
  5. Oxygen Side-blown Bath Smelting of Lead Sulfide Concentrate-A New Process for Direct Lead Smelting
    硫化铅精矿氧气侧吹熔池熔炼直接炼铅新技术
  6. Modelling Experimental Investigations of the Height of Bottom Blown Oxygen Flow Penetrating Bath
    底吹氧气流股穿透熔池高度的模型实验研究
  7. Application on Pretreatment of Soda Boiling-Oxygen Bleaching One-Bath-Process of T/ C Drills
    涤棉卡其碱氧一浴前处理工艺的应用
  8. This paper summarizes the results obtained from experimental model studies on the behaviour of supersonic oxygen jet in top-blown steelmaking converters, especially the interaction of the jet on the liquid bath.
    本文总结了用模型实验研究顶吹氧气转炉炼钢过程中超音速氧气射流的特性及其对熔池作用的某些问题。
  9. Oxygen injected above the liquid-steeel bath to oxidise carbon monoxide liberates heat, reducing specific power consumption by 10 per cent and tap-to-tap time by 7 per cent. A large amount of energy is produced very cheaply, making the process very attractive.
    氧气喷吹到钢液面氧化CO释放出能量,能使单位功率消耗降低10%,出铜至出钢时间减少7%,这个能廉价产生大量能量的工艺过程非常有吸引力。
  10. The Isa technology comprises blowing a certain amount of blast air and oxygen through the lance into the molten bath consisting of concentrate, fluxes and reverts.
    艾萨技术包括通过喷枪向熔池喷吹一定量的空气和氧气,同时向熔池内加入精矿、熔剂和返料。
  11. The slag temperature and morphology were measured and observed. The equilibrium between the slag and melt and the reaction of oxygen jet with the bath were analyzed.
    检测了炉渣的流动温度和岩相结构,分析了渣-钢之间化学反应的平衡状况和氧射流对熔池的作用。
  12. Laboratory experiments are performed in accordance with the similarity theory. Representative results, such as axial velocity decay and lateral velocity distribution of the supersonic oxygen jet as well as its penetration depth and impact area on the liquid bath have been obtained.
    应用相似原理进行实验室研究,得出超音速氧气射流轴线上速度衰减,断面速度分布,以及射流对液体熔池的穿透深度和冲击面积等一些规律性的结果。
  13. It is confirmed from the experimental results that: ( 1) vigorous carbon oxygen reaction under vacuum can remove nitrogen in steel bath effectively;
    研究结果表明:(1)真空下强烈的碳氧反应能有效地脱除钢中的氮;
  14. This paper analysed briefly technical characteristic of different kinds of copper crude metallurgy and combined with productive practice of Yunnan Copper Industry Company. Application of oxygen enriched air top blowing bath smelting process to reconstruct copper crude metallurgy system have been put forward.
    文章简要分析各种铜粗炼工艺特点,结合云南铜业股份有限公司生产实际,提出了采用富氧顶吹熔池熔炼法改造铜粗炼系统是较为合理的工艺方案。
  15. Investigations are made on the influence of desizing upon the pretreating quality of Tencel twill by treatments of alkali_ oxygen one bath, cold pad_ batch at room temperature and enzyme.
    采用碱氧一浴法、室温冷堆法和酶处理三种方法,探讨了退浆工艺对Tencel斜纹织物前处理质量的影响;
  16. QPQ-a compound treatment method of nitrogen, carbon and oxygen salt bath, is a chemical treatment process.
    QPQ技术是一种氮、碳、氧盐浴复合处理技术,是一种热化学处理过程。
  17. The results show that a part of copper and tin is oxidized as oxygen is blasted into bath to react with iron, and they stayed in the FeO-rich slag, since the slag and metals can not completely co-reacted mutually.
    结果表明,向熔池中吹氧氧化铁的同时,有部分铜、锡等元素被氧化,由于金属渣间反应进行的不充分而使金属滞留于熔渣中。
  18. It describes major features of Noranda oxygen enriched air bath smelting process and its adaptability to modification of Daye Smelter, analyses in details the modification design and the difference from Horne Smelter and presents satisfactory results achieved after modification.
    阐述了诺兰达富氧熔池熔炼工艺的主要特点和对大冶冶炼厂改造的适应性,详细分析了大冶改造设计与霍恩冶炼厂的不同之处,并介绍改进后所取得的效果。